back

With this series you get a simulated temperature limiter, so to speak, if manual reset is not possible or the switch is installed in such a way that it can no longer be reached for manual reset. If the main circuit of your application is then interrupted by the thermal release, the switching contact is artificially kept open for the voltage so long as an AC voltage between 100VAC and 250VAC is flowing. After disconnecting the voltage by pulling the mains plug or interrupting it using the main switch, the contact resets itself to continuity after cooling.Zusatztext-links-code

rk-display-none

Product group: Temperature Limiter

SP1 with selfholding

Normally open (NO) with self-holding
Switching temperature from 70°C – 180°C
AC Voltage between 100 and 250VAC
Simulates a limiter function

RK_Produktbeschreibung

rk-display-none

Data from your applicationData from your application

rk-display-none

°C Switching temperature

Current (Ampere)

Power rating (Voltage)

Use our experience and advice to make the best possible choice. Your information on the intended use and environmental influences provide the basis for an optimal solution:RK_PRODUCT_NOTIZEN-2

rk-display-none

Notizen:

notizen

Data sheets serve as an initial orientation as on whether a switch meets the basic requirements and is not a substitute for technical advice.

Download data sheets:

thermal protector SP1

SP1 with selfholding

Download data sheets:

There are many more possibilities, as we can present here.